Specification for lab furniture:
Product name: O-frame lab furniture with new design shelf
Type: JH-WF029
The size can be custom-made requested by customers.
A. Metal frame:
1. Material for upright frame: It's made of 60X40X2.0mm steel pipe by welding, it's with epoxy resin powder after acid-washing and phosphorization.
2. Connection wing: solid plastic parts or welded steel part on O-frame itself, it depends on customer's requirement.
3. Adjustable feet: Using M10 screws(treated by galvanization) with adjustable height not less than 10mm.
B.Worktop:
16mmphenolic resin worktop or 19mm epoxy resin worktop which are resistant for chemicals and high temperature. The worktops can be washed easily. The worktop can bear the weight about 200-300kg. The gap height between worktops≤2mm.
C. cabinet:
1. Door: The material is E1 standard 18mm plywood with melamine with 2mm PVC water proof edgings.
2. Side panel and layer panel: The material is E1 standard 18mm plywood with melamine with 2mm PVC water proof edgings.
3. Back panel: E1 standard 18mm plywood with 2mm PVC water proof edgings. The back panel can be dissembled and it's convenient for installation and maintain of pipe and electricity cable.
4. Drawer: The material is E1 standard plywood with melamine with PVC water proof edgings.
5. Drawer sliding rail: Using steel 3-joints weight bearing sliding rail without noise on both sides of drawer.
6. Handle: Using stainless U-type specialized handle.
7. Hinge: 304 stainless stee hydraulic hinge which is rust resistance.
Product name: O-frame lab furniture with new design shelf
Type: JH-WF029
The size can be custom-made requested by customers.
A. Metal frame:
1. Material for upright frame: It's made of 60X40X2.0mm steel pipe by welding, it's with epoxy resin powder after acid-washing and phosphorization.
2. Connection wing: solid plastic parts or welded steel part on O-frame itself, it depends on customer's requirement.
3. Adjustable feet: Using M10 screws(treated by galvanization) with adjustable height not less than 10mm.
B.Worktop:
16mmphenolic resin worktop or 19mm epoxy resin worktop which are resistant for chemicals and high temperature. The worktops can be washed easily. The worktop can bear the weight about 200-300kg. The gap height between worktops≤2mm.
C. cabinet:
1. Door: The material is E1 standard 18mm plywood with melamine with 2mm PVC water proof edgings.
2. Side panel and layer panel: The material is E1 standard 18mm plywood with melamine with 2mm PVC water proof edgings.
3. Back panel: E1 standard 18mm plywood with 2mm PVC water proof edgings. The back panel can be dissembled and it's convenient for installation and maintain of pipe and electricity cable.
4. Drawer: The material is E1 standard plywood with melamine with PVC water proof edgings.
5. Drawer sliding rail: Using steel 3-joints weight bearing sliding rail without noise on both sides of drawer.
6. Handle: Using stainless U-type specialized handle.
7. Hinge: 304 stainless stee hydraulic hinge which is rust resistance.
|
Lab-grade phenolic resin worktop. | Epoxy resin workstop | Ceramic workstop |
Ingredient
|
Dipping phenolic resin into special multi-layer kraft paper , it is hot-solid
formed under high temperature and pressure.
|
Quartz sand and epoxy mixed with special bond | Combined clay,kaolin and feldspar mixed with many special material |
Corrosive resistance
|
It is resistant for many kinds of acid,alkali,solvent and reagent etc. | It is resistant for many kinds of acid,alkali,solvent and reagent etc | Excellent |
Heat resistance
|
Normal: 135ºC, it could not touch flame directly. | 600ºC heat resistance | 1000ºC heat resistance |
Colour
|
Black,gray,dark green | Gray,gray,green | Black,gray,white,green |
Worktop
thickness
|
12.7mm,16mm,19mm | 16mm,19mm,25mm | 20mm |
Water resistance | water absorption:0.6% | water absorption:0.008% | Excellent |
Physics
feature
|
Good | Good | Excellent |